BLG(W) Series - Single-Stage, Single-Suction Vertical/Horizontal Pumps
A new-generation inline centrifugal pump developed from BL hydraulics and the long-shaft vertical structure. Designed to replace conventional IS horizontal and DL series pumps with broader coverage and modular variants.
Product Description
The BLG(W) single-stage, single-suction vertical & horizontal inline centrifugal pumps are engineered using BL hydraulic parameters and the long vertical pump architecture. The range spans basic, extended, and A/B/C trimmed-impeller configurations, covering ~250 specifications. For different media and temperatures, the same hydraulic performance can be built as hot-water, chemical, oil, and explosion-proof chemical pump series.
Main Technical Parameters
| Item | Range |
|---|---|
| Flow | 1.5–1200 m³/h |
| Head | 8–150 m |
| Power | 0.18–160 kW |
| Temperature | −20–100 °C (variant-dependent) |
| Working Pressure | 0–1.6 MPa (high-pressure up to ~42 MPa) |
| Materials | Carbon Steel, Cast Iron, 304, 316L, 2205 |
| Applications | Municipal & industrial water supply/return, high-rise boosting, HVAC, landscaping irrigation, fire boosting, long-distance water transfer, equipment packages |
Products Description
Streamlined inline build with a small footprint and clean appearance.
Same-size suction/discharge on a common centerline for valve-like inline mounting at any point in the pipeline. Outdoor motor & rain hood available; base feet improve mounting stability.
Low-noise bearings with on-the-run lubrication; impellers dynamically and statically balanced for low vibration and a better working environment.
Wear- and corrosion-resistant hard-alloy mechanical seal eliminates packing leakage, extends service life, and keeps the site clean.
No need to remove piping-just undo the pump cover nuts and lift out the motor & rotating assembly for maintenance.
Vertical, horizontal, or mixed installations. Parallel/series combinations available to meet specific duty (flow/head) requirements.
Operating Environments & Variants
BLG(W) - Standard Water Pump
For clean water and liquids with water-like properties. Typical for industrial & municipal water supply/return, high-rise pressure boosting, landscaping irrigation, fire boosting, long-distance transfer, heating, bath hot/cold circulation boosting, and package systems.
BLG(W)R - Hot-Water Pump
Civil & industrial heating systems, domestic hot-water pressure boosting and circulation, and process heat systems: power plants, cogeneration, waste-heat utilization, metallurgy, chemical, textile, wood processing, paper, and other industrial boilers with high-temperature hot water.
BLG(W)H - Chemical Pump
Corrosive liquids without solids, viscosity ~ water. Suited to light-industry & textile, petroleum, chemical, metallurgy, power, paper, food & pharma, and synthetic fibers.
BLG(W)YGB - Explosion-Proof Oil Pump
For non-corrosive flammable and explosive liquids in light-industry, chemical, and machinery sectors. Explosion-proof execution for hazardous areas.
BLG(W)HB - Explosion-Proof Chemical Pump
Corrosive, water-like liquids (no solids) that are flammable/explosive-light-industry & textile, petroleum, chemical, metallurgy, mining, pharma, and synthetic fibers.
BLG(W)D - Low-Speed Inline Pump
Chilled-water & cooling-water circulation and terminal boosting in AC systems, local/terminal circulation in urban heating, and localized constant-pressure boosting for building fire-protection systems-well-suited as boiler/terminal companions.
| Parameter | Value / Notes |
|---|---|
| Hydraulic Coverage | Basic, Extended, A/B/C trimmed impellers (~250 specs) |
| Install Modes | Vertical / Horizontal / Mixed; inline valve-style mounting |
| Combining | Parallel (↑Flow) / Series (↑Head) |
| Seal | Hard-alloy mechanical seal (leak-tight, wear & corrosion resistant) |
| Bearings | Low-noise bearings with on-the-run lubrication device |
| Applications | Water supply/return, high-rise boosting, irrigation, fire boosting, long-distance transfer, HVAC & heating circulation, equipment packages |
* Data above is indicative for the BLG(W) family. Final selection should be based on duty point, medium, temperature, construction, and area classification requirements.
Hot Tags: Vertical/Horizontal Single-Stage Pipeline Centrifugal Water Pump, China Vertical/Horizontal Single-Stage Pipeline Centrifugal Water Pump manufacturers, suppliers, factory
Main Technical Parameters
| Item | Range |
|---|---|
| Flow | 1.5–1200 m³/h |
| Head | 8–150 m |
| Power | 0.18–160 kW |
| Temperature | −20–100 °C (variant-dependent) |
| Working Pressure | 0–1.6 MPa (high-pressure up to ~42 MPa) |
| Materials | Carbon Steel, Cast Iron, 304, 316L, 2205 |
| Applications | Municipal & industrial water supply/return, high-rise boosting, HVAC, landscaping irrigation, fire boosting, long-distance water transfer, equipment packages |







