Application of Permanent Magnet Servo Motors in Bending Machines

For a long time, electro-hydraulic servo press brakes have been the mainstream equipment in the sheet metal processing industry, thanks to their mature, stable technology and robust heavy-duty performance; they are suitable for the vast majority of standard bending applications and have laid a solid foundation for the industry's development. However, driven by the rising demand for high-end precision manufacturing, green low-carbon production, and flexible small-batch orders-alongside an increasing need for cost reduction and efficiency improvements across the equipment's entire lifecycle-traditional electro-hydraulic servo press brakes are increasingly struggling to meet modern production standards regarding high-precision stability, energy consumption control, ease of maintenance, and workshop cleanliness. Against this backdrop of industry evolution, all-electric press brakes equipped with specialized permanent magnet servo motors have emerged and are rapidly gaining widespread adoption.
Limitations on the Operating Conditions of Traditional Electro-Hydraulic Servo Bending Machines
Dynamic fluctuations in oil temperature limit the stability of precision machining accuracy.
Electro-hydraulic equipment relies on hydraulic fluid to transmit power; the continuous operation of the oil pump generates heat, causing fluctuations in oil temperature and viscosity. This leads to slight deviations in the equipment's slide pressure and positioning accuracy. While such errors are negligible for standard workpieces, they become significant in mass-production scenarios involving thin stainless steel sheets, precision aluminum alloy housings, or complex multi-stage bending operations. Issues such as accuracy drift between the start and end of a shift and accuracy degradation during continuous production necessitate frequent manual recalibration, thereby impacting the yield rate and production efficiency of high-end components.
Continuous standby operation; the proportion of inefficient energy consumption is relatively high.
The oil pump in an electro-hydraulic servo system operates continuously, remaining active during standby, loading/unloading, and tool-changing intervals, while performing effective work only during the actual bending process. For high-volume, continuous production scenarios, the impact on energy consumption is relatively limited; however, in sheet metal workshops characterized by high-mix, intermittent production, energy wasted during idle operation accounts for a significant share of total consumption. Over time, this leads to high electricity costs that squeeze the enterprise's profit margins.
Hydraulic components require regular maintenance and have limited suitability for clean environments.
Electro-hydraulic bending machines feature a comprehensive hydraulic system comprising standard wear parts-such as hydraulic fluid, oil seals, filter elements, and proportional valves-that are subject to normal wear and tear; regular maintenance ensures stable operation. However, in high-cleanliness production environments (such as those for medical devices, electronics, or food-grade kitchenware), oil contamination caused by system aging or leakage can drive up workpiece cleaning costs and even compromise product aesthetics. Furthermore, for enterprises striving for highly efficient and streamlined maintenance, there is room to optimize the time and financial costs associated with annual consumables replacement and hydraulic system servicing.
Hydraulic response characteristics constrain high-frequency flexible production cycle times.
The response speed of the hydraulic transmission is moderate and suitable for conventional processing rhythms. However, in the current mainstream small batch, multi-variety, and quick-change production modes, the pressure calibration and working mode switching of the hydraulic system take a long time, and the signal response speed and action connection smoothness are not as good as pure electric drive equipment. For precision sheet metal production lines that require frequent mold changes, quick start and stop, and short-term and efficient mass production, there is limited room for improvement in production cycle time.

Technological iteration and upgrading
Precision control via a triple-loop system eliminates oil temperature interference, ensuring superior stability in precision machining.
The motor features an integrated triple-loop (position, speed, and torque) vector control algorithm paired with a high-precision optical linear scale for real-time position feedback, achieving a signal response time of ≤5ms; this ensures precise transmission unaffected by oil temperature or pressure fluctuations. The permanent magnet rotor maintains a stable magnetic field, ensuring consistent, precise power output over the long term and fundamentally eliminating accuracy drift-making it ideal for the mass production of precision components. The equipment delivers stable slide repeatability of ±0.01mm and controls bending angle errors to within ±0.1°, maintaining accuracy without degradation during eight hours of continuous full-load operation. Optimized dual-motor synchronization algorithms ensure consistent parallelism across the length of the workpiece during bending, effectively addressing issues such as springback in thin sheets and deformation caused by off-center loading.
Start and stop output on demand to significantly reduce wasted energy, resulting in greater energy efficiency during long-term operation.
Unlike hydraulic pumps that operate with continuous idling, all-electric bending machines utilize a "work-on-demand" logic characterized by low energy consumption during no-load periods. Peak torque is generated only during the actual bending phase, while power output automatically drops during standby, idle strokes, and tool changes, thereby eliminating energy waste caused by heat generation. Furthermore, the permanent magnet rotor eliminates excitation losses; the motor achieves an operating efficiency of ≥94%, resulting in an energy conversion rate far superior to traditional drive systems. In high-frequency, intermittent, and precision mass-production scenarios, these machines offer an overall energy saving of 40%–60%. Long-term two-shift operations can significantly reduce electricity costs, aligning with industry trends toward green manufacturing.
Minimalist mechanical structure, easy operation and maintenance, suitable for clean production environments.
All-electric press brakes eliminate consumable components such as hydraulic oil, oil seals, and piping; this results in a significantly simplified structure and a marked reduction in potential failure points. Our specialized permanent magnet servo motors feature a sealed, dust- and water-resistant design suited for the dusty environments of sheet metal workshops. With highly durable core components, the equipment operates without critical failures for 3–5 years under standard production conditions. Routine maintenance requires only simple cleaning and periodic lubrication, resulting in annual operating costs far lower than those of electro-hydraulic models. Furthermore, the design completely eliminates oil leaks and oil mist pollution, making it ideal for clean production environments-such as those for medical devices, electronics, and kitchen/bathroom fixtures-while reducing additional costs associated with workpiece cleaning or scrapping. The motor includes a built-in self-diagnostic function, eliminating the need for specialized hydraulic maintenance personnel and significantly reducing equipment downtime for inspections and repairs.
High dynamic response, efficient and flexible changeover, and suitability for multi-variety production.
Permanent magnet servo motors feature high overload capacity, rapid response, and smooth start-stop performance; they offer an instantaneous overload capability of up to 2.5 times the rated torque and ensure seamless acceleration and deceleration without mechanical shock, effectively improving bending cycle times. Changing product specifications requires no recalibration of hydraulic pressure-only adjustments to motor motion parameters-allowing for a switchover in just five minutes; this makes the equipment highly suitable for the flexible production demands of the modern sheet metal industry, characterized by high product variety, small batch sizes, and short delivery times. Additionally, reduced operating noise effectively improves the workshop working environment.

Applicable industries: precision sheet metal, new energy components, complete telecommunications equipment, medical devices, stainless steel kitchen and bathroom products, and high-end manufacturing of electrical cabinets.
