Jul 17, 2024

Introduction to the manufacturing process requirements of industrial ceiling fan motor hubs

Leave a message

The wheels that everyone is more familiar with are the car wheels that are often seen in life. It is the metal part that supports the center of the tire, is mounted on the axle, and plays an important role in the safety of the car. The hub is also used for large industrial fans, and the hub chassis is used to connect the blades. It is extremely important to reduce the weight of the whole machine, ensure the dynamic balance of the fan, and improve the efficiency of the motor, so the material and manufacturing process of the wheel hub are very demanding.

The fastening device of the output shaft of the industrial ceiling fan geared motor connects the hub and the output shaft safely and firmly, and the fastening device forms a structural self-locking, which can still ensure that the hub and the output shaft are reliably fastened together even if the bolt at the end of the output shaft is loose. The one-piece hub is equipped with five sets of special-shaped mounting holes, embedded with five special-shaped fasteners, and the edge of the hub is designed with a unique rubber vibration isolation device. When the external force strongly impacts the blade, the device can absorb the impact energy, greatly buffer the impact of the external force on the junction between the hub and the petiole, and enhance the reliability of the connection.

The continuous improvement of the hub connection mechanism can ensure a better safety factor of the whole machine. The wheel hub is made of 7075 aviation-grade aluminum, which is processed by CNC lathe, CNC precision machining technology and dynamic balance detection, so that the shape of the wheel hub is highly consistent, the metal streamline is complete, and the chassis has good mechanical properties. After CNC machining, the precision tolerance of the wheel hub is controlled at 100μm, which ensures the precise dynamic balance of the chassis. The reliable service life of the wheel hub is about 40 years, and it can withstand 10 times the structural strength of the fan, so as to ensure the tolerance and dynamic balance of large industrial fans, and its accuracy is as accurate and reliable as that of automobile wheels.

Send Inquiry